Polyester needle punched felt

HOME > needle punched felts > Polyester needle punched felt

Polyester needle punched felt

Polyester needle felt at room temperature is the use of non-woven acupuncture process using fiber staggered arrangement, the gap evenly distributed fine fiber cloth to polyester staple fiber and polyester twisted yarn produced by needle felt.

Polyester needle punched felt expert

 

Description

 

We use large fiber company's fiber plant production of 1.2 denier, 2 denier, 2.5 denier high-quality polyester denier and imported equipment for the production of polyester filter felt. The machine can be more than five different materials, different specifications of the fiber evenly quantitative mixing, and then mixed with multiple sets of cotton and carding unit will help the fiber between the layers of different fiber composite layer, gradient transformation.
In addition to the product with the ordinary blanket-specific high-porosity, permeability, and dust-efficient, long life and other advantages, Its moderate temperature rating, instantly up to 150 ° C, acid and alkali-resistant features and has a very good wear resistance. Therefore, polyester filter bag is the most common materials in the filter bag family. Weight from 350g / m2 ~ 600g / m2, thickness from 1mm ~ 4mm, width 2.5 meters below our factory can produce, and can be cut to a variety of width.

Surface after hot rolling, singeing or coating and other post-processing, so that the surface smooth and difficult to be blocked by dust, the filter porosity, air permeability is better, uses a wide range of anti-chemical stability, not only can Filtration at room temperature gas, and can filter corrosive gases containing acid and alkali, and filter water, oil filter, is the normal temperature conditions, liquid-solid separation and other areas of the ideal filter material.

Standard specification for Polyester needle punched felt:

 

Fibre Composition

Polyester staple fiber

Scrim Composition

Polyester filament

Weight

500

g/m2

Thickness

1.9

mm

Mean Air Permeability

9-12

m3/m2/[email protected]

Breaking Strength-CD ( warp )

1000

N/5x20cm

Breaking Strength-MD (weft)

1300

N/5x20cm

Breaking Elongation-CD

<30

%

Breaking EIongation-MD

<50

%

Dry Shrinkage-CD

< 1

%

Dry Shrinkage-MD

< 1

%

Recommended Continous Operating Temperature

130

°C

Recommended Short-term Operating Temperature

150

°C

Finishing

Singeing, calendering, heat setting treatment

 

About us

China Sunrise Mining Equipment(SINOCSM) is a professional mining machinery manufacturer, is a professional development, design, manufacturing, sales in one of the modern environmental science and technology enterprises. Our strong technical force, advanced production equipment and has a complete set of quality system and world-class production equipment. After years of development, we have customers all over the world.


Please provide the following information, We will contact you as soon as possible.

 

Address:Haitian International, East Street, Haian County, Jiangsu Province, China
Tel: +86-513-88820117
Fax: +86-513-88812117
E-mail:[email protected]
©2016 CSM MACHINE